JB Machine Shop

Mike and Brad are awesome to work with, very descriptive and helpful on the proper fix or what needs to be done. Prices are good and they always will do something a little extra to help me out. I use them for everything.

Motor was not assembled correctly. So it ended up costing more time and money to diagnose and fix. They were good enough to refund the cost of fixing the motor to kind of properly run. The staff is kind and friendly, unfortunately I only have 250kms on the new motor and it already is leaking oil from lower valve seals quite heavily. I wouldn't suggest unless you are hands on and willing to put in work as well. Never ran correctly and still trying to diagnose. :( UPDATE : 2 months later . The issue was finally found by another mechanic. The motor was not assembled to spec. Cylinder 3 is completely fouled and full of oil. Oil leaks from cam towers, oil leak from rear main, Timing tensioner stud fell out. NOT what you expect from a full rebuild... Going to have to spend another 3-5k to rebuild it again. UPDATE : 7 months later. Countless thousands of dollars spent on trying to get motor back to running condition. Distributor installed upside down. Pulley painted so it will not come off. Dowl pins hammered Into place and fell out. Cam tower bolts finger tight. Leaks everywhere.